News
Publish our latest news in real time

News

Solutions to problems encountered in the production of Zhejiang photovoltaic modules

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-05-12
  • Views:0

(Summary description)Below, Yinghe Energy solar panel components, Zhejiang distributed photovoltaic power station and Zhejiang photovoltaic module manufacturers will talk about solutions to problems encountered in the production of Zhejiang photovoltaic modules.

Solutions to problems encountered in the production of Zhejiang photovoltaic modules

(Summary description)Below, Yinghe Energy solar panel components, Zhejiang distributed photovoltaic power station and Zhejiang photovoltaic module manufacturers will talk about solutions to problems encountered in the production of Zhejiang photovoltaic modules.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-05-12
  • Views:0

Below, Yinghe Energy solar panel components, Zhejiang distributed photovoltaic power station and Zhejiang photovoltaic module manufacturers will talk about solutions to problems encountered in the production of Zhejiang photovoltaic modules.

1. There are debris in Zhejiang photovoltaic module components

1. First, we must strictly control the quality of electric welding in the electric welding area, and carry out some purposeful learning and training for employees, so that electric welding can take shape at one time. 2. Adjust the lamination processing technology, increase the vacuum packaging time, and reduce the pressure of the lamination (regulate according to the lamination time). 3. Operate the important links well and raise the hand style of the laminating staff to lift the board.

2. There are bubbles in Zhejiang photovoltaic module components

1. Operate the total number of EVA commonly used daily, and let every employee master the daily tasks of daily production and production. 2. The raw materials are decided by the manufacturer, so choose good raw materials as much as possible. 3. Adjust the main parameters of the laminating process to make the vacuum packaging time appropriate. 4. Expand the working pressure of the lamination. (It can be adjusted according to the laminating time or another layer of high-temperature cloth. 5. Put a high-temperature cloth so that the parts are evenly heated. (The larger temperature difference is less than 4°). 6. According to the manufacturer The main parameters shown are to clarify the total time for laminating to avoid too long. 7. 6S management should be paid attention to, especially in the process of laminating, to minimize the ingress of dirt.

3. There are hair and waste in Zhejiang photovoltaic module components

1. Do a good job of 6S handling, keep the nearby office environment clean and tidy, and change clothes and pants frequently to do a good job of hygiene. 2. Adjust the processing technology, carry out the actual operation improvement of the stacking process, and change the single person to pick and place the raw materials to two persons. 3. Operate the safe passage and install the electronic mosquito killer to reduce the entry of small insects.

Fourth, the bus bar is bent inward

1. Adjust the main parameters of the lamination process to extend the vacuum packaging time and reduce the working pressure of the lamination. 2. Choose good raw materials.

5. The back film of Zhejiang photovoltaic module components is uneven

1. Choose a good vulcanized rubber rubber sheet. 2. Do a good job of finishing the high temperature cloth every time, and immediately remove the remaining EVA on the rubber sheet.

Related News/Latest News

Solar

Solar lighting system

Because solar power has the characteristics of cleanliness, extensiveness and adequacy of resources that are unmatched by thermal power, hydropower, and nuclear power, solar lighting systems are more and more widely used in people's lives.
2021-05-12
The

The basic principle of off-grid photovoltaic power generation system

Off-grid photovoltaic power generation systems are widely used in remote mountain areas, areas without electricity, islands, communication base stations, and street lights.
2021-05-12
Packaging

Packaging materials for photovoltaic modules in Zhejiang

Below, Yinghe Energy solar panel components, Zhejiang distributed photovoltaic power station and Zhejiang photovoltaic module manufacturers will talk about the packaging materials of Zhejiang photovoltaic modules.
2021-05-12
Zhejiang

Zhejiang distributed photovoltaic power station has high environmental protection efficiency

Zhejiang Distributed Photovoltaic Power Station is a new type of power acquisition method. Compared with the traditional method, it is also cleaner and more cost-saving. It is an efficient power application form of the power station. In recent years, it has been deeply loved and praised by us.
2021-05-12
Zhejiang Yueyang Industry & Trade Co., Ltd

Zhejiang Yueyang Industry & Trade Co., Ltd

Consulting service

+86-0579-87250857

Address:No. 98, Sifang Road, Yongkang, Zhejiang

Email:chinaledo_2000@126.com

Web:http://www.yyopto.com

 

Contact: Manager Deng(+86-18858924648) |   Mr. Wang(+86-15356907086)    |   Manager Zhang(+86-15381752862

Phone:+86-0579-87250857      

Fax:+86-0579-87208202

QR code

Mobile

© 2021  ZHEJIANG YUEYANG INDUSTRY AND TRADE CO.,LTD www.yyopto.com  浙ICP备18023214号-1   Powered by www.300.cn

© 2021  Zhejiang Yueyang Industry & Trade Co., Ltd All rights reserved. 

浙ICP备18023214号-1   Powered by www.300.cn